Welcome to Hybrid Energy services

Hybrid Energy Services Ltd is 100% Canadian owned and operated serving the Canadian Oilfield since 2003.

The philosophy of Hybrid is to integrate technology with safety creating accountability. Accountability to all services ultimately results in an environmentally safe oilfield that will protect the natural resources of Canada for many generations to come. President and CEO Jason Lytwyn states "It's the end to end integration of innovative products and services that directly impacts the successful completion of each well drilled."

EVERY CONNECTION MUST TELL A STORY


WincattSoftwareTool

Computer torque monitoring equipment can only perform to the same standard the operator is trained. Recording the torque and going home is not acceptable in today's industry. Optimization of the equipment reduces liability and creates accountability.


Hybrid Energy Services Ltd has trained our operators to execute a higher standard and will continue to do so. Every single connection must tell a story. This story must justify why the connection was accepted or rejected, and the comments must be able to justify the connection specifications.


WinCatt is a software tool which interacts with external control hardware to provide real time monitoring and control of tubular connection power tong make-up. It has been developed jointly by FARR Canada Limited, and the Centre For Engineering Research Inc. (C-FER) or Farr's exclusive distribution. The graphical user interface and logical software structure combined with powerful control, data acquisition and presentation capabilities enable the user to easily specify make-up parameters, control the make-up process and evaluate quality.

Job reports submitted that fail to comply with the above standard creates a liability situation if there is a casing leak. Who's liable? Did the crews adhere to manufacture specification when running the casing? Was position considered during final torque? Was there a threading issue from the casing manufacture? Was the correct application of thread compounds chosen and applied?


The sole purpose of utilizing modern technology is to reduce the liability, and/or put the onus on the negligent party. Hybrid Energy Services Ltd has maintained extensive training to ensure our field operators are trained and knowledgeable running each casing connection. Connections are not simply "monitored" they are analyzed to ensure manufacture procedures and policies where attained prior to running the casing into the hole.


Action, reaction. Cause and effect. Protect yourself. Hiring Hybrid guarantees you have done your due diligence to ensure the service you have requested is being performed to the highest industry standard.


WinCatt was developed with an emphasis on the user's needs for reliability, accuracy, and ease of use. Key features are:


Function Analysis Safety Reporting
monitors torque, turns, and rotational speed during make-up analyzes make-up to determine: conformance to manufacturer's specification shouldering point for premium connections shouldering time, delta torque, delta turns limit torque to user specifies maximum during idle time job description
WincattSoftwareTool_2 Thumbnail
controls speed during make-up (optional)      
controls based on either final torque or final turns      
includes calibration management system      
includes automatic "Start Recording" & "Dump Valve Release"      
includes automatic descriptive comments with optional over-ride      
available with optional pressure test system      

TECHNICAL SPECIFICATIONS


Sampling Frequency: User defined from 1 - 8000 Hz, 500 Hz recommended


Recording Frequency: Based on combination of delta torque and user defined delta time


Calibration Management: Choice of calculated calibration based on load cell manufacturer specifications or local calibration based on user force standard. Shunt calibration with automatic "drift" tracking


Response time: Electronics < .5 ms Hydraulics - dependent on dump valve - typically 10 - 30 ms


Final torque: Average = optimum torque +/- 1% Standard deviation < 2% under normal operating conditions


Operating temperature: Computer, 5 - 50oC (40 - 122oF) Junction box, minus 30 - 80oC (minus 22 -180oF)


Torque accuracy: max error (% of full scale) = sqrt[Local force standard error2 + arm length error2 + 0.152] Typically less than 1%.

The philosophy of Hybrid is to integrate technology with safety creating accountability. Accountability to all services ultimately results in an environmentally safe oilfield that will protect the natural resources of Canada for many generations to come. President and CEO Jason Lytwyn states "It's the end to end integration of innovative products and services that directly impacts the successful completion of each well drilled."

Featured Service

Computer torque monitoring equipment can only perform to the same standard the operator is trained. Recording the torque and going home is not acceptable in today's industry. Optimization of the equipment reduces liability and creates accountability.

View Service Pageplus service

Featured News

18 Feb
news1

Power make up utilizing Power Tongs

18 Feb
news2

Hybrid Energy Services

18 Feb
news3

wireless torque sub.